Sheet And Plate

• Application
• Other, Automobile, Electrical Panels, Construction, Manufacturing, Furniture

• Chemical Composition
• C, Mn, P, S, Si (Varies with grade)

• Coating Type
• None (custom coating available upon request)

• Color
• Silver/Grey

• Composition
• Low Carbon Steel

• Corrosion Resistant
• Yes, with surface treatment

• Diameter
• Not applicable (sheet form)

• Dimension (L*W*H)
• Customized as per order

• Finish Type
• Smooth, Cleaned

• Grade
• SPCC, SPCD, SPCE, SAE 1008, IS 513, etc.

• Hardness
• 40-65 HRB

• Heat Resistance
• Yes

• Material Composition %
• C 0.10%, Mn 0.50%, P 0.035%, S 0.035% (Typical for low carbon)

• Material Grade
• Commercial, Drawing, Deep Drawing Grades

• Product Form
• Sheet

• Product Name
• Other, Cold Rolled Steel Sheet

• Recyclable
• Yes

• Shape
• Other, Rectangular / Sheet

• Size
• As per order (custom cut)

• Steel Product Type
• Other, Steel Sheet

• Steel Standard
• Other, JIS G3141, ASTM A1008, IS 513, DIN EN 10130

• Steel Type
• Other, Cold Rolled

• Surface
• Bright, Matte, Oiled, Dry

• Temper
• Annealed, Full Hard, Quarter Hard, Skin Pass

• Tensile Strength
• 270-410 MPa (varies by grade)

• Thickness
• 0.3 mm to 3 mm

• Usage
• Stamping, Forming, Fabrication

• Weight
• Varies by size and thickness

• Width
• 600 mm - 2000 mm

• Application
• Other, Construction, fabrication, manufacturing, automotive, shipbuilding

• Chemical Composition
• Varies; commonly low carbon steel (C, Mn, Si, P, S)

• Coating Type
• Uncoated (can be supplied with oil or painted on request)

• Color
• Gray, metallic

• Composition
• Iron with carbon and minor alloying elements

• Corrosion Resistant
• Moderate (requires coating for better resistance)

• Diameter
• N/A (applies to round bars, not sheets)

• Dimension (L*W*H)
• Custom sizes; example 2000 mm x 1000 mm x 4 mm

• Finish Type
• Hot rolled, unpolished

• Grade
• As per requirement (e.g. ASTM A36, S235JR, IS 2062)

• Hardness
• Approx. 120-180 HB (Brinell Hardness)

• Heat Resistance
• Yes

• Material Composition %
• Fe >98%, C <0.3%, Mn <1.65%, Si <0.6%, S/P <0.05%

• Material Grade
• Commercial or structural grades

• Product Form
• Sheet/Plate

• Product Name
• Other, Steel Hot Rolled Sheet

• Recyclable
• Yes

• Shape
• Other, Rectangular sheet/plate

• Size
• Available in standard and custom sizes

• Steel Product Type
• Other, Plate/Sheet

• Steel Standard
• Other, ASTM, EN, IS, JIS standards

• Steel Type
• Other, Mild Steel / Low Carbon Steel

• Surface
• Mill finish, rough

• Temper
• Hot Rolled

• Tensile Strength
• 370-700 MPa depending on grade

• Thickness
• 1.2 mm - 20 mm (other thickness available on request)

• Usage
• General fabrication, structural work, manufacturing of machine parts

• Weight
• Depends on size and thickness, e.g. ~32 kg/m2 for 4 mm thick

• Width
• Customizable (typically 600 mm - 2500 mm)

• Application
• Other, Automotive, Electrical Panels, Furniture, Appliances, General Fabrication

• Chemical Composition
• Low Carbon Steel, C 0.10%

• Coating Type
• Uncoated; available with oil coating if specified

• Color
• Metallic Grey

• Composition
• Low Carbon Steel

• Corrosion Resistant
• No, requires further surface treatment

• Diameter
• N/A (Sheet Form)

• Dimension (L*W*H)
• Customized, typically 2500 mm x 1250 mm x (thickness)

• Finish Type
• Bright / Smooth Finish

• Grade
• IS 513 D/D, IS 513 EDD, IS 513 IF, ASTM A1008, JIS G3141 SPCC/SPCD/SPCE

• Hardness
• HRB 40-60

• Heat Resistance
• Yes

• Material Composition %
• Iron > 98%, Carbon 0.10%, Manganese 0.50%

• Material Grade
• IS 513, ASTM A1008, JIS G3141

• Product Form
• Sheet

• Product Name
• Other, CRCA Sheet (Cold Rolled Close Annealed Sheet)

• Recyclable
• Yes

• Shape
• Other, Rectangular/Sheet

• Size
• Standard or Custom, e.g., 1220 x 2440 mm

• Steel Product Type
• Other, Steel Sheet

• Steel Standard
• Other, IS 513, ASTM A1008, JIS G3141

• Steel Type
• Mild Steel

• Surface
• Bright, Matte, Smooth Finish

• Temper
• Annealed, Full Hard

• Tensile Strength
• 270 - 410 MPa

• Thickness
• 0.3 mm to 3.2 mm

• Usage
• Fabrication, Automotive Panels, Sheet Metal Works

• Weight
• Varies as per size, approx. 8-50 kg per sheet

• Width
• 600 mm to 1500 mm

• Application
• Other, Automobile parts, home appliances, construction, general engineering

• Chemical Composition
• Low Carbon Steel, primarily Fe with C, Mn, Si, S, P

• Coating Type
• Without coating / Oiled

• Color
• Silver/Grey

• Composition
• Carbon (C), Manganese (Mn), Phosphorus (P), Sulphur (S), Iron (Fe)

• Corrosion Resistant
• Non-corrosion resistant without surface coating

• Diameter
• Applicable in coil form; standard inner diameter 508mm/610mm

• Dimension (L*W*H)
• As per customer requirements

• Finish Type
• Smooth finish

• Grade
• IS 513/CRCA, JIS G3141 SPCC, ST12, SAE 1006/1008

• Hardness
• 48-60 HRB

• Heat Resistance
• Yes

• Material Composition %
• C: 0.12%, Mn: 0.50%, P: 0.040%, S: 0.040%, Fe: Balance

• Material Grade
• Commercial, Drawing, Deep Drawing, Extra Deep Drawing quality

• Product Form
• Flat Sheet/Coil

• Product Name
• Other, CR Coil Sheet

• Recyclable
• Yes

• Shape
• Other, Sheet / Coil

• Size
• Custom sizes available

• Steel Product Type
• Other, Sheet / Coil

• Steel Standard
• Other, IS 513, JIS G3141, DIN 1623, ASTM A1008

• Steel Type
• Other, Cold Rolled Steel

• Surface
• Smooth, Bright, Light Oil

• Temper
• Soft, Full Hard, Quarter Hard, Half Hard

• Tensile Strength
• 270-410 MPa

• Thickness
• 0.3mm - 3.0mm

• Usage
• Fabrication, manufacturing, construction, paneling

• Weight
• Customizable, varies by size and thickness

• Width
• 600mm - 1500mm

• Application
• Other, Automotive, Construction, Electrical Panels, General Engineering, Fabrication

• Chemical Composition
• Primarily Iron (Fe), Carbon (C), with coating of Zinc (Zn)

• Coating Type
• Galvanized (Zinc Coating)

• Color
• Silvery/Grey

• Composition
• MS base with Zinc coating

• Corrosion Resistant
• Yes, due to zinc coating

• Diameter
• Coil inner diameter usually 508 mm/610 mm

• Dimension (L*W*H)
• Standard or as required by customer specifications

• Finish Type
• Plain, Galvanized, Shiny

• Grade
• IS 277, ASTM A653, JIS G3302 or equivalent

• Hardness
• Soft to semi-hard

• Heat Resistance
• Yes

• Material Composition %
• Zinc Coating: 80 to 275 gsm, Iron: Balance

• Material Grade
• Commercial, Drawing, Structural, or per customer requirement

• Product Form
• Formed as Sheet or Coil

• Product Name
• Other, GP Coil Sheet

• Recyclable
• Yes

• Shape
• Other, Sheet/Coil

• Size
• Custom sizes available as per requirement

• Steel Product Type
• Other, Galvanized Plain Sheet/Coil

• Steel Standard
• Other, IS, ASTM, JIS Standards

• Steel Type
• Other, Mild Steel (MS)

• Surface
• Smooth, Shiny, Spangle or Non-Spangle

• Temper
• Soft/Annealed or as required

• Tensile Strength
• 270 MPa min (varies with grade)

• Thickness
• 0.12 mm to 3 mm

• Usage
• Industrial, Construction, Automotive, Fabrication

• Weight
• Depends on dimension and thickness, typically 2-10 metric tons per coil

• Width
• 600 mm - 1500 mm

• Application
• Other, Automobile, Construction, Industrial Equipment, Structural Uses

• Chemical Composition
• Low Carbon Steel (Typically C: 0.15-0.25%, Mn, Si, S, P)

• Coating Type
• No coating (as supplied); can be surface treated

• Color
• Grey (with possible oxide scale)

• Composition
• Iron with Alloying Elements (C, Mn, Si, etc.)

• Corrosion Resistant
• Moderate (requires coating for enhanced resistance)

• Diameter
• N/A (sheet/plate form)

• Dimension (L*W*H)
• Customizable, Common: 2500 mm x 1250 mm x (thickness)

• Finish Type
• Hot Rolled, Untreated

• Grade
• IS 2062, ASTM A36, EN 10025, Others on Request

• Hardness
• Approx. 160-190 HB

• Heat Resistance
• Yes

• Material Composition %
• Fe: 98%, C: 0.15-0.25%, Mn: 0.30-0.90%, Others: Traces

• Material Grade
• IS 2062 E250 / E350, S235JR, S275JR

• Product Form
• Sheet/Plate

• Product Name
• Other, HR Sheet

• Recyclable
• Yes

• Shape
• Other, Rectangular, Flat

• Size
• Custom/Standard - 2500x1250 mm, 3000x1500 mm or as required

• Steel Product Type
• Other, Sheet

• Steel Standard
• Other, ASTM, IS, EN

• Steel Type
• Mild Steel

• Surface
• Hot Rolled, Mill Finish

• Temper
• Hot Rolled

• Tensile Strength
• 370 - 490 MPa (typical)

• Thickness
• 2 mm to 60 mm

• Usage
• Structural Fabrication, Auto parts, Machinery, Shipbuilding

• Weight
• Variable (Based on thickness and dimensions)

• Width
• Up to 2500 mm

• Application
• Other, Construction, Structural fabrication, Engineering, Industrial manufacturing

• Chemical Composition
• As per IS 2062/ASTM/AISI grade specifications

• Coating Type
• Uncoated / available with customer specified coating on request

• Color
• Dark grey, black scale (hot rolled)

• Composition
• Primarily Iron with percentage carbon, manganese, and trace elements as per grade

• Corrosion Resistant
• Moderate, improves with coating

• Diameter
• Not applicable (Plate form)

• Dimension (L*W*H)
• Custom as per client requirements

• Finish Type
• Hot Rolled Finish

• Grade
• IS 2062, E250, E350, S235JR, S275JR, ASTM A36, etc.

• Hardness
• Approx. 120-180 HB (Brinell Hardness, depending on grade)

• Heat Resistance
• Yes

• Material Composition %
• Varies with grade, e.g., Carbon 0.15-0.25%, Manganese 0.60-1.20%, Silicon 0.40%

• Material Grade
• Available in multiple grades

• Product Form
• Flat Plate

• Product Name
• Other, HR Plate (Hot Rolled Plate)

• Recyclable
• Yes

• Shape
• Other, Rectangular Plate

• Size
• Standard or Custom sizes available

• Steel Product Type
• Other, Steel Plate

• Steel Standard
• Other, IS 2062, ASTM A36, EN 10025, JIS G3101, DIN 17100, etc.

• Steel Type
• Other, Mild Steel / Carbon Steel

• Surface
• Mill finish / Hot rolled surface

• Temper
• HR (Hot Rolled)

• Tensile Strength
• 410 - 560 MPa (varies as per grade)

• Thickness
• 2 mm to 300 mm

• Usage
• Structural construction, machine parts, heavy equipment, ships, bridges

• Weight
• Varies based on dimensions

• Width
• Varies as per requirement

• Application
• Other, Industrial Flooring, Stair Treads, Walkways, Ramps, Platforms

• Chemical Composition
• Primarily Carbon and Iron with traces of Mn, P, S, Si

• Coating Type
• Optional: Galvanized or Painted

• Color
• Metallic Grey

• Composition
• Low carbon steel alloy

• Corrosion Resistant
• Moderate, can be improved with coating

• Dimension (L*W*H)
• Typically up to 6000 mm x 2500 mm; Thickness 2.5 mm - 12 mm

• Finish Type
• Hot rolled finish

• Grade
• IS 2062, ASTM A36 or as required

• Hardness
• 120 - 160 HB

• Heat Resistance
• Yes

• Material Composition %
• Fe -- Balance, C -- < 0.23%, Mn -- 0.50-1.50%

• Material Grade
• IS 2062 / Equivalent

• Product Form
• Sheet/Plate

• Product Name
• Other, Industrial MS Chequered Plate

• Recyclable
• Yes

• Shape
• Other, Rectangular (Sheet/Plate)

• Size
• Standard and custom sizes available

• Steel Product Type
• Other, Chequered Plate (Patterned Sheet)

• Steel Standard
• Other, IS 3502, IS 2062, ASTM A36

• Steel Type
• Other, Mild Steel (MS)

• Surface
• Chequered (Diamond pattern)

• Temper
• Hot Rolled

• Tensile Strength
• 370 - 410 MPa

• Thickness
• 2.5 mm - 12 mm

• Usage
• Industrial, Construction, Fabrication, Platforms, Steps

• Weight
• Varies with size (approx. 20-80 kg per piece)

• Width
• Up to 2500 mm

• Application
• Other, Industrial flooring, ramps, stair treads, walkways, platforms

• Chemical Composition
• Mild Steel (Fe, C, Mn, Si, S, P)

• Coating Type
• Uncoated, can be supplied with painted or galvanized finish by request

• Color
• Grey, Metallic

• Composition
• Low Carbon Steel

• Corrosion Resistant
• Moderate (can be improved by galvanizing or coating)

• Diameter
• N/A (plate form)

• Dimension (L*W*H)
• Customized as per requirement, typically 1000 mm x 2000 mm, 1250 mm x 2500 mm, etc.

• Finish Type
• Bright, Chequered

• Grade
• IS 2062, ASTM A36, EN10025, BS4360, S235JR

• Hardness
• 130-165 HB

• Heat Resistance
• Yes

• Material Composition %
• Carbon: 0.18% max, Manganese: 0.50%-1.5%, Silicon: 0.10%-0.40%, Sulphur & Phosphorus: 0.04% max each

• Material Grade
• IS 2062 E250, E350, DIN St37, S235JR

• Product Form
• Plate/Sheet

• Product Name
• Other, MS Chequered Plate

• Recyclable
• Yes

• Shape
• Other, Rectangular

• Size
• Standard or customized sizes (1000x2000 mm, 1250x2500 mm, 1500x3000 mm, etc.)

• Steel Product Type
• Other, Chequered Plate

• Steel Standard
• Other, IS 3502, IS 2062, ASTM A36

• Steel Type
• Mild Steel

• Surface
• Chequered, Raised Diamond Pattern

• Temper
• Hot Rolled

• Tensile Strength
• 410 MPa (Min)

• Thickness
• 2.0 mm - 10 mm

• Usage
• Flooring, Structural, Ramps, Walkways, Safety Applications

• Weight
• Varies with size and thickness (approx. 35-98 kg/m2)

• Width
• 600 mm - 2500 mm